C-71-5 Earthdrill

C-71-5 Earthdrill from Ground Hog | Northeast Equipment DistributorsThe Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.

The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8” square auger drive.

Aluminum castings are used throughout the C-71-5’s construction to produce a unit that is both strong and lightweight. The C-71-5 uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars.

The C-71-5 is available with 3 engine options; Honda, Briggs & Stratton Intek and Subaru.
Maximum Auger Speed
160 rpm @ 3600 engine rpm (no load)
Maximum Torque
192 ft. lbs. torque (approximate)
Max. Auger Diameter
12 inches (31 cm)

Weight
72 lbs. (33 kg)
Length
40.5 inches (103 cm)
Width
30 inches (76 cm)
Height (Honda)
20.5 inches (52 cm)

516V Log Splitter

516 Log Splitter from PowerTek | Northeast Equipment Distributors

Axle Type: Rigid
Fender/tail lights: n/a
Max Log Length: 26”
Ram Stroke: 24”
Splitting Tons: 20
Pump: 2 stage
Auto Ram Return: Yes
Cycle time: 13 sec
Max pressure: 3000 PSI
Wedge Height: 7”
Tire Size: 570 x 8
Cyl. Dia. & Shaft: 4” x 1.75”
Weight: 600 lbs.
Max Height (Hor.): 41”
Length: 98”
Width: 50”
GPM: 11
Angle of Wedge: 7 Degree